IT IS ADVISABLE TO BEGIN TREATMENT AT THE HEADLANDS.
WHEN THE TREATMENT IS OVER, OR IF THE SAME HAS TO BE TEMPORARILY
INTERRUPTED, ALWAYS LET THE FAN STILL OPERATE FOR APPROXIMATELY 30
SECONDS AFTER CUTTING-OUT THE POWER SUPPLY (EITHER MANUAL DISTRIBUTOR
P10 OR ELECTRICAL DISTRIBUTOR E11), IN ORDER TO FULLY ELIMINATE THE
PRODUCT MIXTURE FROM THE DISTRIBUTING DEVICES, SO PREVENTING ANY POSSIBLE
ANOMALOUS DRIPPING FROM TAKING PLACE.
18
THE TREATMENT
• The operator must:
a. Shake the mixture in the tank before starting the treatment, re-circulating it completely for as long
as it takes to make it homogeneous.
b. Check the orientation of the distributors (hands, guns and/or fishtails) of the distribution device
(sprayhead) in relation to the dimensions, the shape and the thickness of the vegetation to be
treated.
c. Continue to shake the mixture until the treatment is resumed should the intervention momentarily
be interrupted. If the utilisation is to be deferred, check that the filter cartridge is clean before
resuming and agitate the mixture that has remained in the tank.
d. Ensure that the hand wash supplementary tank is filled with clean water after each filling
operation.
e. Make use of individual protections identical to those envisaged for the preparation of mixtures if
the tractor is not equipped with a pressurised cabin with aeration filters.
f. Wash immediately all the elements that might have become contaminated during the treatment,
promptly remove the polluted garments and interrupt the work if these cannot be immediately
replaced.
g. Keep to the preliminary operations already indicated (10.1.c), in case of wind conditions prevailing.
h. Stop the engine, remove the key from the tractor’s control panel and lower the hoist during
stoppages.
i. Pay particular attention to the treatment when close to boundaries and in proximity of dwellings,
waterways, roads or public-usage paths.
ST101-GEO-i 400 / 600 LITER
- Tractor Mounted
