SST Automation GT200-HT-RS, User Manual

Page: 47 / 52

WWW.SSTCOMM.COM 47
4---- Error defined in agreement
5---- Not connected

Universal Receive label: The receive label under the universal mode, this value which changes one time
indicates that HART end receives a HART frame

Universal receive data length: Indicating the received data length under the universal mode

Universal Receive Error Counter: Indicate the universal receive error number

Universal receive data: Store the received data at HART side under the universal mode

Reset send, receive, error counter: The gateway’s control signal, when the value of memory changes,
gateway causes all the counter to 0

Polling is enabled: This bit is readable and writable, writing 1 enables the polling output, writing 0 disables
polling output; Reading 1 indicates that the polling state is enabled, 0 indicates that the polling is in the
disabled state

Trigger label: Change the value will result in a trigger operation

Trigger command number: Command number executed by trigger operation

Universal mode enabled: The value of 1 indicates a universal transfer function is enabled, otherwise disables
universal transport function

Universal send label: The send label under the universal mode, this value changes in time will lead to send a
HART frame

The universal send data length: The length of send data under the universal mode

Universal to send data: Data needs to send under the universal mode