SST Automation GT200-HT-RS, User Manual

Page: 21 / 52

WWW.SSTCOMM.COM 21
AutoMap: Used to automatically calculate the mapped memory address without confliction by each
command
Conflict: To check whether there are some conflicts with configured commands in the gateway
memory data buffer
Export: Output current configuration to the local hard disk and saved as Excel spreadsheet form
Memory: Show the data exchange inside of the gateway
Diagnose: through this function could analyze operating condition of fieldbus device; also it can finish
some certain analysis
Debug: through this function could send any request frame to Hart fieldbus and show the response
information received in HART, convenient to debug
4.2 Software Functional Specifications
4.2.1 Connect with the Hardware
Put the gateway configuration switch to “ON”, use a serial port line to connect the gateway RS-232 port and
that of computer or use USB cable line to connect gateway’s USB port and computer . Power on the gateway and
its LED display displaying “CF” indicates it is in the configuration mode.