SST Automation GT200-HT-RS, User Manual

Page: 29 / 52

WWW.SSTCOMM.COM 29
data only includes data area of HART frame;
Modbus register starting address of receiving data: the property is automatically calculated by gateway, used
for register addressing;
Receiving data length (BYTE): set the length of input data by this command;
Receiving data length (WORD): the property is automatically calculated by gateway, used for user checking
output data length conveniently, 1 word=2 byte;
Command index: the property is automatically calculated by the configuration software, it indicates the index
in the configured command list this command belongs to.
4.2.4.5 Delete Commands
Select the command need to be deleted, Right click the mouse and click “Delete Command”. Through the
menu command can also be the same action.
4.2.4.6 Delete Nodes
Select the node needed to be deleted, Right click the mouse and click “Delete Node”. Through the menu
command can also be the same action.
4.2.4.7 Advanced Options to Configure Slave Commands
When using HART command configuration, sometimes users want to get one part data of one command. For
example, No.1 HART command. The float value of main variable is only needed, no need to get unit of main
variable, this is why advanced option exists. Advanced options is actually the execution of “segment mapping
function”, it cut the response data of HART command and get the segment data. Users can get any part data they
want. Below is the interface of Advanced Options: