15
DebonAir Seal Head Only Upgrade
Apply red Loctite 2760 or 270 to the first two to three full threads on
Apply red Loctite 2760 or 270 to the first two to three full threads on
the end of the air shaft.
the end of the air shaft.
Clamp an 8 mm hex wrench into a vise. Insert the air piston onto the
Clamp an 8 mm hex wrench into a vise. Insert the air piston onto the
wrench to secure it. Install the new, red air shaft nut onto the air shaft
wrench to secure it. Install the new, red air shaft nut onto the air shaft
and tighten it.
and tighten it.
NOTICE
To ensure compatibility and correct performance, during reassembly
ONLY
use the shaft nut that is compatible with the
new
seal head.
The silver shaft nut is compatible only with the 2019-2020 seal head.
The red shaft nut is compatible only with the 2021-2022 seal head.
Loctite 2760 or 270
5
8 mm
8 mm / 12 mm
3.3 N•m (29 in-lb)
