29
DebonAir Spring Removal
D e b o n A i r S p r i n g R e m o v a l
⚠
WARNING- EYE HAZARD
Verify all pressure is removed from the fork before proceeding. Depress the Schrader valve again to remove any remaining air pressure. Failure to
do so can result in injury and/or damage to the fork.
NOTICE
Inspect each part for scratches. Do not scratch any sealing surfaces
when servicing your suspension. Scratches can cause leaks.
When replacing seals and o-rings, use your fingers or a pick to
remove the seal or o-ring. Spray isopropyl alcohol on each part and
clean with a clean lint-free shop towel.
Apply SRAM Butter grease to the new seals and o-rings
Remove the air spring top cap.
Remove the air spring top cap.
Clean the upper tube threads.
Clean the upper tube threads.
Remove the retaining ring. Use your finger to guide the retaining ring
Remove the retaining ring. Use your finger to guide the retaining ring
over the spring shaft.
over the spring shaft.
NOTICE
Do not scratch the air spring shaft. Scratches on the air shaft will
allow air to bypass the seal head into the lower leg, resulting in
reduced spring performance.
SRAM Butter
1
Top Cap/Cassette Tool
2
Retaining Ring Pliers
