81
Rebound Damper Installation
2 0 0 H o u r S e r v i c e
R e b o u n d D a m p e r I n s t a l l a t i o n
Insert the seal head into the upper tube through the crown, and push it
down just below the upper tube threads. Use a dowel if needed.
NOTICE
Use care to avoid damaging the outer o-ring.
Push the seal head down to the end of the upper tube.
While pushing the dowel down firmly against the seal head to secure it,
use the palm of you hand to press the retainer onto the end of the seal
head until it snaps into place.
Confirm the retainer is installed securely.
1
2
Dowel (15 mm - 17 mm diameter)
3
Dowel (15 mm - 17 mm diameter)