SPX SPIDAR NIC-500s, Operation Manual, Page: 20 / 119

Getting Started
12
Figure 3-5: Connecting Noggin cables to the NIC-500N
Once completed, move on to Powering up in Section 3.4.
3.1.2 NIC-500P
Up to two pairs of pulseEKKO PRO antennas can be plugged into the pulseEKKO ports on the
NIC-500
. These ports are numbered ‘1’, ‘2’, ‘3’ and ‘4’. Note that ports ‘1’ and ‘3’ should be
used for t
ransmitters and ports ‘2’ and ‘4’ for receivers. In addition, ports ‘1’ and ‘2’ must be
used for a pair,
before ports ‘3’ and ‘4’.
If you are connecting a single pair of antennas, the Tx will connect to port ‘1’ and the Rx will
connect to por
t ‘2’ (Figure 3-6). See
Section 8.2 on compatibility.
Figure 3-6: Single pair of antennas connected to NIC-500P
Once completed, move on to Powering up in Section 3.4.