background image

 

LIMITED WARRANTY 

 

SPX

 GSE tech-motive tool

 warrants its PRODUCTS to be free from defects in materials and workmanship for the 

lesser of  (1) one year from the date of shipment from the manufacturing facility in Michigan, U.S.A. OR  
(2) one-million cycles except for the products noted below: 

GSE tech-motive

 crowfoot, tubenut and hold & drive heads 

250,000 cycles 

3

rd

-party crowfoot, tubenut, hold-and-drive torque multiplier or other heads 

manufacturer’s warranty  

56 and 116 Series nutrunners 

500,000 cycles 

PRODUCTS include 

GSE tech-motive too

l brand fastening tools, controllers and cables, 

GSE

 brand sensors and 

instruments, and anti-lock brake testing systems. Fuses and batteries are not covered under warranty. 

For PRODUCTS verified as defective at SPX 

GSE tech-motive

 

tool’s

 manufacturing facility,  

SPX 

GSE tech-motive tool 

shall have the option, in its sole discretion, to repair or replace the products or 

components. SPX 

GSE tech-motive tool

 shall not be liable for any installation charges, expenses of the Buyer for 

repairs or replacement, damages from delay or loss of use, or other indirect or consequential damages of any kind.  
The warranty does not cover any product that has been modified without the approval of SPX 

GSE tech-motive tool

used for a purpose other than that for which it was intended, used in a manner inconsistent with any instructions, 
subjected to unusual physical stress, environmental or electrical conditions, or whose original identification marks 
have been removed or altered. 

Whenever the PRODUCTS are to be incorporated in a system, the design of which originated with the Buyer,  
SPX 

GSE tech-motive

 warrants only that the PRODUCTS shall be free of defects in materials and workmanship and 

offers no other warranty.   

In the event that a product is repaired or replaced under the terms of the warranty, the warranty period for the 
repaired or replacement product shall be limited to the remaining portion of the original warranty. 

Any warranty extended by the original manufacturer of peripheral equipment, such as printers, recorders, plotters, 
etc., included with a SPX 

GSE tech-motive tool

 product or system shall be extended to the Buyer and shall be the 

only warranty offered. 

Transportation charges for materials shipped to the manufacturing facility for warranty repair are to be paid by the 
Buyer. SPX 

GSE tech-motive tool

 will pay for shipping to return items repaired or replaced under warranty.  

THIS LIMITED WARRANTY IS EXCLUSIVE, AND SPX 

GSE tech-motive tool

 MAKES NO OTHER WARRANTY OF 

ANY KIND WHATSOEVER, WHETHER EXPRESSED, IMPLIED OR STATUTORY, WITH RESPECT TO THE 
PRODUCTS OR PARTS MANUFACTURED BY IT, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE OR ANY OTHER MATTER OR WARRANTY OF ANY KIND.  No agent, employee or 
representative of SPX 

GSE tech-motive tool

 has the authority to bind SPX 

GSE tech-motive tool

 in any affirmation, 

representation, or warranty concerning the Products or parts except as stated herein. 
 
THIS REMEDY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE FOR ANY NONCONFORMITIES IN 
MATERIALS OR WORKMANSHIP, OR FOR ANY DAMAGES RESULTING FROM ANY OTHER CAUSE 
WHATSOEVER.  SPX 

GSE tech-motive tool

 SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY SPECIAL, 

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, NATURE OR DESCRIPTION, 
WHETHER FOR NONCONFORMITIES IN MATERIALS OR WORKMANSHIP UNDER ANY WARRANTY, IN 
CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR FOR ANY OTHER REASON. 

Summary of Contents for GSE tech-motive tool SD25 Series



































Reviews: