SD25 Series Screwdrivers
Page 16
T-40409-A
39-30-40409
The screwdriver inputs are software selectable using VS. To enable the push-to-start function, assign
the Cycle On input to Input 8, and assign the Cycle Enable input and Clear Outputs input to the
Trigger. The typical inputs for a screwdriver with push-to-start function enabled are shown below.
Throttle/Trigger lever
Forward/reverse button
•
Press to enable the fastening cycle
•
Release to stop the screwdriver
•
Press and release
2 times
to change the
parameter sets
•
Press and release to
change the direction
Multi-purpose (auxiliary) button
•
Push to start the fastening cycle
•
Release to stop the screwdriver
Push-to-start
Summary of Contents for GSE tech-motive tool SD25 Series
Page 1: ...SD25 Series Electric Screwdrivers User s Manual Rev B June 2004 39 30 40409...
Page 8: ...SD25 Series Screwdrivers Page iv T 40409 A 39 30 40409 This page is left blank intentionally...
Page 32: ...SD25 Series Screwdrivers Page 24 T 40409 A 39 30 40409 This page is left blank intentionally...
Page 33: ......
