February 17, 2010
4
922-175-T TIC TAC TOE PANEL BELOW DECK
INSTALLATION INSTRUCTION
BEFORE YOU BEGIN
In addition to the components on the packing list you will need a
tape measure, drill with a #7 bit and a 7/32 wrench.
INSTALLATION STEPS
__1)
Review all instructions before beginning:
__2)
Unpack, organize, and identify all components:
Be sure to
place all painted components on a protective surface (cardboard,
cloth, etc…) to prevent damage.
__3)
Locate placement of the Dino Panel:
See top down view of
your instruction booklet.
__4)
Mark posts for location of Four-Hole Brackets:
After you
have the proper location, place a Four Hole Bracket (2) on each end
of the Dino Panel (1).
CRITICAL MEASUREMENT
IT IS
EXTREMILY IMPORTANT THAT YOU MAINTAIN A
MAXIMUM OF 3 1/2” DISTANCE BETWEEN THE TOP,
BOTTOM, OR SIDES OF THE PANEL AND THE NEAREST
EDGE OF THE DECK OR POSTS. After You Have determined
the correct height of the Panel mark and drill the holes for the Four
Hole Brackets. (See detail A)
__5)
Install the Four Hole Brackets:
Install the Self-Tapping
Screws (4)into the holes you have drilled in the posts with the
Attachment Bracket Gasket (3) between the post and Four- Hole
Attachment Bracket (2). Making sure the threaded hole is facing
the ground. (See detail A)
Summary of Contents for QUICK SHIP UNIT 1 STANDARD
