SportsPlay QUICK SHIP UNIT 1 STANDARD, Installation Instructions Manual

Page: 49 / 109

March 20, 2014 5
922-118-3 “U” CLIMBER 3’ DECK
INSTALLATION INSTRUCTION
SPECIFICATIONS

Paint – Electrostatically applied & oven cured powder coat

Hardware – Stainless steel & tamper resistant

Tube – FloCoat® Galvanized 1 3/8” OD and 1” OD.

Attachment Bracket – Powder coated cast aluminum
 “U” Climber–1 7/8” O.D. tube with 1 3/8 O.D. bent into
16” half circles and welded to 1 7/8” tube.

Arch Wall-1 7/8”, 1 3/8”, and 1” O.D. tube MIG welded
together
INSTALLATION TIPS & TROUBLE SHOOTING

SportsPlay Equipment Inc. recommends pre-drilling the
holes in the post when attaching a four-hole bracket with a
number #7 drill bit. This will make the attachment of the
four-hole bracket with the self-tapping screws easier and it
will prevent damage to the screw head during installation.

Apply locktite to all bolts during assembly prior to
completely tightening them.

Stainless Steel hardware can occasionally be difficult to use
particularly if you need to take them out to make an
adjustment. It is recommended that you add a drop of oil to
bolts that may have to be removed before you install them.

Do not tighten bolts all the way until the unit is completely
assembled and all components are square and level.

Identify and separate all parts by referencing the detail
drawings and the parts list.

As you unpack and separate the components, use the
cardboard sheets that were used for packing and shipping to
prevent damage to the components. This is particularly true
all Powder Coated and Thermoplastic coated components,
by setting the components on top of the cardboard.