SportDOG SPORTTRAINER SD-800E, Operating Manual

Page: 100 / 112

100 WWW.sportdog.com
FI
DA
SV
RU
NO
EN
STEP
::
02
PREPARE THE COLLAR RECEIVER
CHARGE THE COLLAR RECEIVER
1. Lift the rubber cover protecting the Collar Receiver
Charging Jack.
2. Connect one of the charger connectors to the Collar
Receiver Charging Jack.
3. Plug the charger into a standard wall outlet.
4. Charge the Collar Receiver for 24 hours for the first charge.
Recharges take only 12 hours.
NOTE: The Receiver Indicator Light will flash after 12 hours of
charging. For the first charge, continue to charge the Collar
Receiver for an additional 12 hours.
5. When charging is completed, replace the rubber cover.
TO TURN THE COLLAR RECEIVER ON:
1. Press and hold the On/Off Button until the Receiver
Indicator Light comes on and the Collar Receiver beeps
5 times.
2. Release the On/Off Button. The Receiver Indicator Light
will flash until the Collar Receiver is turned off. The flashing
light indicates the Collar Receiver is ready to receive a
radio signal from the Remote Transmitter.
TO TURN THE COLLAR RECEIVER OFF:
1. Press and hold the On/Off Button until the Receiver
Indicator Light comes on and the Collar Receiver beeps
5 times.
2. Release the On/Off Button.
The Receiver Indicator Light will flash until the Collar Receiver is turned off. The flashing light indicates the
Collar Receiver is ready to receive a radio signal from the Remote Transmitter.
CHARGER CONNECTOR PLACED IN COLLAR
RECEIVER CHARGING JACK
ON/OFF BUTTON