DRAFT
64
Spohn & Burkhardt
5.6. Standing working position
Danger!
To prevent serious injuries and damage to the control stand, you must never stand on the
bull‘s horns (footrests) (16).
The bull‘s horns (footrests) (16) are only for support during operation in the seated wor-
king position.
Figure 18.
15
3
16
1
1.1
Standing working position
For fatigue-free and ergonomic working, the control stand FSMMD allows you to change between a
seated and a standing working position. To change from the seated to the standing working position,
proceed as follows:
Caution!
Make sure that only the elements for adjusting the related working position are actuated
while changing the working position. The controls and joysticks for operation are NOT
allowed to be actuated while changing the working position.
1. Stand on the footrest (
15
).
2. Move the seat (
1
) and the seat cushion (
1.1
) to the rearmost position
(see chapter 5.2. „Working posi-
tion adjustment – manual“, Seite 59)
.
3. Adjust the footrest (
15
) to the required position
(see chapter 5.1. „Working position adjustment – elec-
trical“, Seite 57)
, make sure you are standing stably and securely.
4. Move the seat (1) to the topmost position
(see chapter 5.1. „Working position adjustment – electrical“,
Seite 57)
.
5. Adjust the consoles (
3
) to the required position
(see chapter 5.1. „Working position adjustment – elec-
trical“, Seite 57)
.
6. Continue operation.
Summary of Contents for FSMMD
