DRAFT
44
Spohn & Burkhardt
Danger!
A pneumatic seat spring system DC 24 V 10 A (optional) is connected to the terminals
marked in the switch cabinet.
Electrical components, if fitted, have been wired to terminals or plugs/sockets in the
switch cabinet according to the requirements of the operating organization. Always fol-
low internal regulations and safety provisions during electrical connection.
It is the responsibility of the operating organization to ensure safe, correct overall func-
tion.
Danger!
To prevent injuries,
• Persons must not stand in the rotating and swiveling area or the linear movement
area of the control stand
• No objects are allowed to be stored in the rotating and swiveling area of the control
stand
• The adjusting features of the control stand are not allowed to be actuated during
operation.
Caution!
The correct function of the control stand must be checked each time before starting work.
Caution!
To prevent long-term harm or signs of fatigue due to an incorrect working position, ad-
just to the working position optimal for you before starting work.
Attention!
Make sure all wires are laid correctly without kinks or points where they can chafe.
Make sure the cable markers are not removed and mark new cables so they can be iden-
tified. Fasten together the cables using cable ties, if necessary. While laying cables, pay
attention to any bending radii specified by the manufacturer.
Attention!
During the installation of the control stand, make sure all minimum distances are main-
tained at the installation location/in the installation space.
Attention! Damage due to transport.
Check the control stand for damage due to transport before installation. Immediately
report any damage to the carrier. Damaged control stands are not allowed to be installed.
Note
The control stand is equipped with an emergency stop button (touch-button on the
memory system display) to prevent injury or damage to the control stand.
Press the emergency stop button if there are anomalies or malfunctions.
Summary of Contents for FSMMD
