DRAFT
60
Spohn & Burkhardt
5.2.3. Bull's horns (footrests)
To adjust the tilt on the bull's horns (footrests) (
16
), proceed as follows:
1. Undo the clamping lever (
18
) and pull the locking pin (
17
).
2. Keep pulling the locking pin (
17
) and place the bull's horns (footrests) (
16
) in the required position.
During this process, make sure that the bull's horns (footrests) (
16
) engage in the position set.
3. Release the locking pin (
17
) and lock the position set using the locking pin (
17
).
4. Re-tighten the clamping lever (
18
).
To swivel the position of the bull's horns (footrests) (
16
) to the outside or inside, proceed as follows:
5. Pull the locking pin (
19
) and keep pulling the locking pin (
19
).
6. Place the bull's horns (footrests) (
20
) in the required position. During this process, make sure that
the bull's horns (footrests) (
20
) engage in the position set.
7. Release the locking pin (
19
) to lock the bull's horns (footrests) (
16
) in the position set.
Note
Please refer to the related documentation for other adjustments,
see chapter 11. “Refer-
ence documents”, page 71.
5.3. Memory system – saving working position
Figure 14.
08:21:23
User
08:21:23
1
7 8 9
4 5 6
1 2 3
0
1
2
3
5
4
1234
6
6.1
6.3
6.2
6.4
6.5
6.4
6.11
Memory system display – logging in and save working position (actual product may vary from figure)
Save your working positions as follows:
1. Press the "User" touch-button (
6.1
) on the display (
6
).
• A numeric keypad (
6.2
) appears on the display (
6
).
2. Enter the 4-digit operator code using the numeric keypad (
6.2
) and accept the operator code using
the "Enter" touch-button (
6.4
).
Summary of Contents for FSMMD
