DRAFT
69
Spohn & Burkhardt
Figure 21.
30
3
31
32
29
Preparatory work: removing consoles (simplified illustration)
If the access to the installation space is smaller than the dimensions of the control stand, also remove
the consoles (3) as follows:
Note
If the access to the installation space is smaller than the dimensions of the control stand,
the wiring is correspondingly prepared by Spohn & Burkhardt so that the electrical con-
nections to the consoles can be disconnected.
6. Disconnect the electrical cables from the consoles (
3
).
7. Remove the cap (
31
) and undo the screw (
32
).
8. Undo the nut (
29
) and remove the nut (
29
) and the washer (
30
).
9. Remove the related console (
3
) from the control stand.
Summary of Contents for FSMMD
