18
Johnny G by Spirit
JB950
PRE-ASSEMBLY
Use the following procedures to unpack and assemble your Johnny G Spirit Bike:
1. Position the shipping carton so the Heavy End is located at the bottom.
2. Cut the straps then lift the box over the unit and unpack. Remove all parts from the shipping carton and foam
inserts, and verify that all parts are included in your shipment.
3. Locate the hardware package. The hardware is separated into four steps. Remove the tools first. Remove the
hardware for each step as needed to avoid confusion. The numbers in the instructions that are in parenthesis (#)
are the item number from the assembly drawing for reference.
NOTE: All tools required to assemble the bike are included within the packaging. If you are missing any of
the parts listed above, inspect the packing material and the box for items that may have been overlooked.
If parts are missing, or if you have any operational questions, please call your local Spirit Fitness’s Service
department or the distributor whom sold you the product. Please see the back of the manual for a listing of
international corporate offices and locate the office nearest you. Have your serial number ready.
CAUTION: Damage to the bike during assembly is not covered as part of the limited Spirit Fitness
warranty. Take care not to drop or lean the bike on its side. Carefully stand the bike up in the normal
upright position on a stable surface so it will not tip over during assembly.
Protect the environment by not disposing of this product with household waste. Check your local authority
or approved waste center for recycling advice and facilities.
