58
Johnny G by Spirit
UPDATE SOFTWARE
Updating software requires a Blank USB memory stick and a computer to
transfer updates from service website, to USB, to console. No other material
besides the updates should be in USB drive. The purpose of this setting is to
update console software with the use of a USB inserted into console.
•
USB port is located underneath the console.
•
Press
Play Key
to display
BOOTLOADER – OFF.
•
Press
+ Key
or
– Key
switch to
BOOTLOADER – ON
.
•
Press
Play Key
, then reset console.
•
Console may display
SEARCH UPDATE.
•
Allow console to power down.
•
Wait until console has turned off. (Powering down could take up to
10 minutes if bike had been ridden for a time before updating software.)
•
Insert the USB drive, wait 1 to 2 minutes.
•
Pedal bike to awaken console.
•
If successful, displays
UPDATE DONE
.
•
If unsuccessful, displays
UPDATE FAIL
, check USB for proper insertion and
attempt again.
•
Press
Play Key
to exit to setting screen.
•
Press
+ Key
for next screen or reset console to exit Maintenance Mode.
