Spirit CS800, Owner'S Manual

Page: 15 / 48

13
www.spiritfitness.com
CS800
STEP THREE
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION QTY
83 SCREW M5 x 10MM 10
85 SHEET METAL SCREWS 4 x 15 3
1.
Match
Left Console Mast Cover (No.57)
with
Right
Console Mast Cover (No.58)
on top of left and right
Chain Covers and around the
Console Mast (No.2)
and secure with three
Sheet Metal Screws (No.85)
by
using the
Phillips Head Screw Driver (No.118)
.
2. Match
Left
and
Right Handlebar Caps (No.68, 69)
together on the U-shape mounting at left side of
Rear
Stabilizer with Handle (No.11)
and use the
Phillips
Head Screw Driver (No.118)
to tighten two
Phillips
Head Screws (No.83)
and secure. Match
Left
and
Right Handlebar Caps (No.68, 69)
together on
U-shape mounting at right side of
Rear Stabilizer with
Handle (No.11)
and repeat the process above.
3. Take off the tie from the Computer Cable (No.31) and
plug it into the Console Assembly (No.30) together
with the two Handpulse Assembly Cables (No.35) .
Place the Console (No.30) on the mounting plat of
the Console Mast (No.2) and secure with four Phillips
Head Screws (No.83) by using the Phillips Head
Screw Driver (No.118).