Spirit CS800, Owner'S Manual

Page: 38 / 48

36
Spirit Fitness
ENGINEERING MODE
To enter the Maintenance Mode, pedal the stepper and press and hold down the Start, Stop and Enter
keys. Keep holding the keys down for about 5 seconds and the Message Center will display Maintenance
Mode. Press the Enter key to access the menu below:
1.
Key Test (Will allow you to test all the keys to make sure they are functioning)
2. Display Test (Tests all the display functions)
3. Function
- Units - Sets the display to read out in Imperial (miles, pounds, feet, etc.) or Metric (kilometers,
kilograms, meters, etc.) display measurements
- Pause mode (have five minutes)
- Odometer Reset (Resets the odometer)
- Sleep mode
- Beep sound (Control Beep)
- CAB Protocol or CSAFE Protocol
4. Service
- Motor test
- Csafe test
- Sensor test (Test the speed sensor function)
5. Exit