7
STEP 1: REAR STABILIZER & SEAT HANDLEBAR ASSEMBLY
1. Install the Rear Stabilizer (7) onto the Main Frame (1) with the four 3/8”×2-1/4” Hex Head Bolts
(65) and four 3/8”×25×2T Flat Washers (84) by using the 12/14mm Wrench (112).
2. Secure the Seat Handle Bar (6) onto the seat carriage (4) with two 3/8"×2" Hex Head Bolts (71)
through the top holes in the Seat Handle Bar and fix with two 3/8"× 7T Nyloc Nuts (89) and 3/8"
× 19 × 1.5T Flat washers (77) side by using 12.14m/m Wrench (112) and 14.15m/m Wrench
(132). Repeat for another side.
3. Install two 3/8” x 2-3/4” Hex Head Bolts (175) through the side holes in the handlebars and fix
with two 3/8"× 7T Nyloc Nuts (89) and 3/8" × 19 × 1.5T Flat washers (77) by using 12/14m/m
Wrench (112) and 14.15m/m Wrench (132).
4. Connect the Handpulse W/Cable Assemblies (21, 27) to the mating connectors mounted in the
Rear Shroud (L) (35).
Assembly Instructions For RECUMBENT
Summary of Contents for CR800 ENT
Page 7: ...6 Tools 114 Phillips Screw Driver 1 pc 112 12 14mm Wrench 1 pc 132 14 15mm Wrench 1 pc ...
Page 13: ...12 Tools 93 Phillips Screw Driver 1pc 100 12 14mm Wrench 1pc 117 13 15mm Wrench 1pc ...
Page 39: ...38 Recumbent Exploded View Diagram ...