Spirit CR800 ENT, Owner'S Manual

Page: 20 / 47

19
Quick-start operation:
• Press “START” button and the console start performing the program. Press “LEVEL” up/down
buttons further to change the resistance level you desire.
• Press first page “HOME” button or “STOP” button to stop the belt.
Featuring functions of this bike:
Touch-control screen is installed for the operation. You can directly touch any functional button on
the screen or through quick buttons on the bottom to control. On the bottom, there are “Resistance”
up/down buttons to control the resistance level, “START” button to begin the workout, “STOP”
button to pause/stop running and “FAN” button to the fan on or off.
Pause/Stop:
• Press “STOP” button once or “HOME” button on the screen, the bike will stop and keep values of
time, distance and calorie on the screen. The screen will count down for 5 minutes then reset and
return to the initial status.
• Press “START” button to continue the workout during pause.
• Press “STOP” button twice will terminate the setting and display the workout summary. If “STOP”
button is pressed the third time, the console will return to the initial status (the beginning).
Heart rate testing feature:
Pulse (heart rate) on the screen shows the current value of the heart beats per minute. You must
hold both left and right stainless steel sensors to test the pulse. The pulse value will be shown on
the screen continuously. You can also use hand pulse sensors for heart rate control. The console
can also detect the pulse from heart rate stripe which is bipolar including signal transmitting.
To turn off the bike:
The screen will turn it off (sleep status) when there is no command within 30 minutes. This is called
sleeping mode and the treadmill will stop most of its activity except the minimum circuit detecting
system for press buttons so that when there is any button activation, the treadmill restarts. There is
only very little electric current (like a TV turned off) in the sleeping mode. It is fine to leave the main
power switch on during sleeping mode.