15
STEP 3: HANDLE BAR ASSEMBLY
1. Secure the Seat Handle Bar (3) onto the Console Mast (2) with the two 5/16”× 5/8” Hex
Head Bolts (51), two 5/16”×18×1.5T Flat Washers (72) and two 5/16" × 1.5T Split Washers
(103) by using the 12/14mm Wrench (100).
2. Let the Handpulse Assembly (26)(28) through the Console Plate (2~3) onto the Console
Mast (2) and out from the Console Plate (2~3).
Summary of Contents for CR800 ENT
Page 7: ...6 Tools 114 Phillips Screw Driver 1 pc 112 12 14mm Wrench 1 pc 132 14 15mm Wrench 1 pc ...
Page 13: ...12 Tools 93 Phillips Screw Driver 1pc 100 12 14mm Wrench 1pc 117 13 15mm Wrench 1pc ...
Page 39: ...38 Recumbent Exploded View Diagram ...