Spirent Landslide C100 Installation Manual Download Page 8 | Manualshive

Page: 8 / 61

background image

About this Guide

Introduction

8

|

Spirent Landslide Test System Installation Guide

Introduction

The purpose of this document is to provide the System Administrator with the
information necessary to install and activate the Landslide Performance Test System.

This document assumes that the Landslide software is properly installed and licensed
on the Landslide appliance.

Related Documentation

Additional documentation for the software used with the system is provided in an online
Help format. The Help documentation can be accessed from the system’s home page or
through the Help menu in the application window. See

“Logging in to the System” on

for instructions on loading the home page after installation is complete.

To install and use the Landslide Tcl API, refer to the

Getting Started > How To Test >

Working with Tcl API > Using the Tcl API

online Help topic.

Additional information on using Landslide can be found in the following related
resources. Refer to the latest version of the Landslide software Release Notes for the most
current information regarding Landslide documentation.

These documents are provided in PDF format:

•

Spirent Landslide Test System Installation Guide (this manual)

•

Landslide Test Server NIC Configurations (appendix to this manual)

•

Landslide Virtual Machine Installation Instructions

•

Landslide Tcl API Object and Perform Function Reference

•

Landslide RESTful Programmer’s Reference

Spirent Customer Service Center / Knowledge Base

The Spirent Customer Service Center (

h ttps://support.spirent.com

) includes useful tools

such as a powerful Knowledge Base. The Knowledge Base offers an easy-to-use browse
mode, along with an intelligent search that offers quick answers to your network analysis
and measurement questions. Log in with your CSC user ID and password to access
content that is available only to customers - user manuals, help files, release notes, and
more.

Information about Spirent Communications and its products and services is available on
the company website at

https://www.spirent.com

«
...
6
7
8
9
10
...
»

Summary of Contents for Landslide C100






























































Reviews:

No comments

Related manuals for Landslide C100

Brand: Cambro Pages: 6

Brand: Raven Pages: 17

Brand: Campbell Pages: 12

Brand: Gebhardt Anlagentechnik Pages: 152

Brand: Hach Pages: 58

Brand: Hach Pages: 52

Brand: Idmed Pages: 2

Marathon Multi600

Brand: Saeyang Pages: 21

Brand: S&C Pages: 11

Brand: UEi Pages: 5

Brand: UGO BASILE Pages: 47

Brand: UFO Pages: 16

Brand: B. Braun Pages: 40

Brand: B. Braun Pages: 4

Brand: mychway Pages: 56

Brand: U-Line Pages: 6

Brand: Zodiac Pages: 32

Brand: Hedson Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands