better, it may be necessary to calibrate the keys in the field.
Use your finger to activate the IR buttons using this process:
Note: Your finger must activate each button approximately 0.1” to .5” from
the surface of the glass.
Press the
(F1)
button until the display shows ‘SET PARAMETER?’ Then use
YES (F4)
.
Use buttons
(F1) (F2)
and
(F3)
to enter "1111" (up/down and next).
Use buttons
(F1) (F2)
and
(F3)
to enter "0000" then press
OK (F4)
.
Turn OFF power to the MTI10/MTL10.
Turn ON power to the MTI10/MTL10 while placing your finger on the
(F1)
IR
key.
55
Operation: Programming