The possible values are: yes, no.
For instance, to enable Fusion on the HMP, use:
<enable-fusion>yes</enable-fusion>
Added in 2.2.4 firmware release.
Enable of Fusion as the startup page instead of HMP Control Center when Fusion is enabled. This option
has no effect if Fusion is disabled.
The possible values are: yes, no.
For instance, to enable Fusion as startup page on the HMP, use:
<fusion-startup>yes</fusion-startup>
This section describes how to configure parameters related to upgrading the firmware.
Note: A firmware update can only be done using an RPC command; it is not possible to trigger a
firmware upgrade using a configuration backup file.
Configure the URI of the firmware repository. If the URI is not provided, then the default location will
be used.
For instance, to reset the firmware location to the default, use:
<firmware-update-uri></firmware-update-uri>
To set the firmware location to the SpinetiX web site, use:
<firmware-update-
uri>http://download.spinetix.com/hmp200/updates/</firmware-update-uri>
Controls whether the device should automatically check and upgrade its firmware on a daily basis or
not. If set to
no
, a manual operation will be necessary to check and update the firmware.
The possible values are: no, 0, 1, 2 ... 23
Summary of Contents for HMP series
Page 1: ...www spinetix com ...
