PulseBlasterESR-PRO
Connector Locations for the SP19 board
Figure 13 shows the connector locations for the SP19 board. More details on the connectors can be
found in the following sections. Please note the HW_TRIG/RESET header for the SP19 board has the
same connections as the SP18A board.
SMA Headers for SP19
The four SMA headers provide access to output flag bits 4 through 7 and are labeled accordingly.
IDC Headers for SP19
Output flag bits 8 through 20 and the status bits are available on IDC headers. Table 2 shows the pin
connectivity for these headers.
2019/09/26
Figure 13:
Connector locations for SP19.
Pin Assignments
Pin#
Flag12..23
Flag24..35
1
Bit 8
Bit 20
2
Bit 9
Stopped
3
Bit 10
Reset
4
Bit 11
Running
5
Bit 12
Waiting
6
Bit 13
Unused
7
Bit 14
Unused
8
Bit 15
Unused
9
Bit 16
Unused
10
Bit 17
Unused
11
Bit 18
Unused
12
Bit 19
Unused
13-26
Ground
Ground
Table 2:
SP19 IDC connector pin outs. Please refer to
Figure 8 for pin numbering information.
