PulseBlasterESR-PRO
IDC Headers for SP4B and SP18A
There are three IDC headers on SP4B and SP18 boards, which provide access to all digital 21
outputs as well as the status bits. These are labeled on the board as
Flag0..11 Out
,
Flag12..23 Out
and
Flag24..35 Out
. On each IDC header, the top row of pins (14-26) are grounds, and the signals are
carried on pins 1-13. The recommended mating connector for IDC header can be obtained through Digi-
Key Part Number: CKR26G-ND.
2019/09/26
Figure 8:
IDC header Pin-Out.
14 15 16 17 18 19 20 21 22 23 24 25 26
1 2 3 4 5 6 7 8 9 10 11 12 13
Figure 6:
Left: BNC T-Adapter and Right: BNC 50 Ohm resistor.
Figure 7:
BNC T-Adapter on the oscilloscope with coaxial
transmission line connected on the left and BNC 50 Ohm resistor
connected on the right, to terminate the line.
