PulseBlasterESR-PRO
3. SpinCore MMCX Adapter Board Figure 20 – This adapter board allows easy access to the individual
bits of the PulseBlasterESR-PRO boards. This adapter board can be part of a package that includes
12 MMCX to BNC cables and three SMA to BNC adapters. However, this package can be changed to
include any number of cables and any number of adapter boards.
Figure 20
: MMCX Adapter Board allows easy access to individual bits.
The SMA-BNC Adapter Board, shown in Figure 21, provides easy access to four additional output
signals from the back panel of your computer. SMA-SMA cables are available from SpinCore upon
request. For ordering information, please visit
http://spincore.com/products/SMA-BNC_Adapter/
http://www.spincore.com/contact.shtml
IDC to BNC Adapter Set-Up on an SP4B Board Figure 22 – Additional BNC output signals can be
accessed using a set-up consisting of an IDC-MMCX adapter board (SP32), MMCX-SMA cables, and
an SMA-BNC adapter board (SP29P).
2019/09/26
Figure 21
: SMA-BNC Adapter Board is available for the SP18A and SP4B boards to access
additional flag bits.
