Spheros DBW 160, Installation Instructions Manual

Page: 75 / 136

DBW 160/230/300/350 Electrical connections
73
Item Description Remarks A B C D
A1 Heater z
A2 Control modulet SG 1553 z
4 Electronic Ignition unit z
5 Thermostat Control thermostat z
7 Thermostat Blower thermostat
{ { {
8 Thermostat Overheat thermostat z
10 Ignition electrodes z
61.3 Supressor (2x) Radio supression {
A Plug connection Control module, 2-pin z
B Plug connection Control module, 6-pin z
B5 Thermostat Nozzle preheating {
C Plug connection Control module, 8-pin
z
F1 Overheat fuse Polarity independent z
F2 Fuse 8A Vehicle fuse DIN 72581 {
F3 Fuse 8A Vehicle fuse DIN 72581 {
F4 Fuse Vehicle fuse DIN 72581 {
F5 Fuse Vehicle fuse DIN 72581 z
F6 Fuse Vehicle fuse DIN 72581 {
H1 Light, green Operation indication
z
H2 Light,
circulating pump If switched by S4 {
K1 Relay Circulating pump; neg. ter-
minal of heater
K2 Relay Heater motor
K3 Relay Light, thermostat operation
control
K4 Relay Electronic ignition unit
K5 Relay Solenoid valve, flame sen-
sor
K6 Relay Nozzle preheating {
K7 Relay Blower of vehicle heater {
M1 Motor Circulating pump z
M2 Motor Combustion air fan z
M3 Motor Combustion air fan z
R Flame sensor Photoresistor, polarity inde-
pendent z
R1 Resistor Motor High power resistor {
R2 Resistor,
heating cartridge Nozzle preheating z
S1 Switch heater on/off z
S3 Switch at water valve Contact open, when water
valve is closed {
S4 Switch for on/offF,
Circulating pump separate {
S6 Schalter Switch for vehicle fan z
X1 Plug connection, 2-pin {
X2 Plug connection, 1-pin {
X3 Plug connection, 2-pin {
X5 Plug connection, 4-pin {
Y1 Solenoid valve Polarity independent
z
A installed in the heater
B supplied loose
C only if required
D provided in vehicle
z included in standard kit
{ may be supplied depending on model
Item Description Remarks A B C D
Legend DBW 160