Sperry Marine VISIONMASTER FT ECDIS-E, User Manual

Page: 308 / 425

Routes ECDIS-E User Guide
8-28 65934012
Leg Data on Route Editor Table
The following leg data can be edited on the route editor table:

Speed - planned ground speed of ownship along route leg

MIN Speed - the minimum planned ground speed of own ship
along route leg.

MAX Speed – the maximum planned ground speed of own ship
along route leg.

XTD Limits (Port and Starboard) - the limit of deviation from the
planned route at which activation of an automatic off-track error
alarm occurs, shown in metres.

Leg Type - Rhumb Line or Great Circle
The following leg data is read-only on the route editor table:

Distance - the leg distance between each waypoint

Bearing - the bearing angle of each leg

Leg Time - the estimated time for leg traversal (in days, hours and
minutes)
Editing Data on the Route Editor Table
To edit route data in the route editor table do the following:
To change the waypoint label:
1. Click in the label field for the selected waypoint, the
text changes to green (editable) and the screen
keypad appears.
2. To clear the existing label click the Clear
button. Enter a label name using the keypad and
click the keypad
OK button. The label entered
appears next to the selected waypoint (if the Show
waypoint labels tick box is enabled in the Route
Display Settings).
To change the waypoint L/L position click in the L/L data
field, the text becomes editable (green) and a drop down
keypad appears. There are a number of ways of defining
the L/L position.
1. Manually enter a L/L position by using the numbers
and navigation buttons on the keypad and click
OK .