ECDIS-E User Guide
Routes
65934012
8-49
Route Display Settings
The Route Display Settings sub-menu enables
you to select the graphic display of labels
associated with the displayed route.
The following display settings are available:
Display Monitored Route - displays the
route currently being monitored. This
setting cannot be switched off.
Critical Point labels - displays a label for
each critical point (CP1 etc.)
Waypoint labels - displays a label for
each waypoint (WPT1 etc.)
Wheelover Type - determines how the
wheelover lines are drawn:
Parallel to next leg (the wheelover line is drawn parallel to the
next leg on the route)
Perpendicular to leg (the wheelover line is drawn at right
angles to the route leg that approaches the associated turn)
Wheelover labels - displays a numerical label for each wheelover
(WO(2) etc.)
Leg bearings - displays bearing data of each route leg in degrees.
Planned speeds - displays own ship's planned speed between
each waypoint.
XTD Alarm Lines - displays a series of XTD lines on the safety
region lines.
The bottom of the Route Display Settings window shows a description of
the settings as the cursor moves over each setting text.
When all display options are ticked the route is displayed as shown below.
Summary of Contents for VISIONMASTER FT ECDIS-E
