Sperry Marine VISIONMASTER FT ECDIS-E, User Manual

Page: 314 / 425

Routes ECDIS-E User Guide
8-34 65934012
Settings

Wheelover
Notifications If this box is ticked, alerts
will be displayed in
monitoring mode when
the check box.
If an Alert is not
acknowledged after a
timeout period of 30
seconds, the Course
Change Warning Alert
will be escalated to an Alarm.

Backup
Navigator
Alarm If this box is ticked the Backup navigator alarm
is raised after a timeout period of 30 seconds,
if the wheelover notifications are not
acknowledged.

Course
Difference
Limit The maximum bearing angle that own ship
may move from the route track defaults to
25.0°. If this value is exceeded, a Course
Different Alert will be raised.

Req ROT
Difference
Limit
The maximum rate of turn angle that own ship
may move from the route track defaults to
10.0° /min. If this value is exceeded, a Course
Different Alert will be raised.
To change the Settings values left click in the respective field and move
the trackball left (to decrease) or right (to increase), left click again to fix the
value.