Sperry Marine VISIONMASTER FT ECDIS-E, User Manual

Page: 213 / 425

ECDIS-E User Guide Navigation Tools
65934012 5-17
To save, open or delete a set of Clearing Lines, do the following:
When one or more clearing lines have been generated, the lines may be
saved, opened, cleared or deleted.
1. If the set of clearing lines are new, click the
Save As button. An Action Required
popup window appears prompting to enter
a name for the line set.
2. Enter a name using the on-screen keypad
and click the OK button. The set is saved
and the given name appears in the Clearing Lines field. Saved
clearing line sets are distributed among system nodes.
3. To open a saved set of clearing lines click the
Open button. An Action Required popup
window appears listing the previously saved
clearing lines sets.
4. Select a set from the list to open and click the
OK button. The selected clearing line set is
drawn on the display.
5. If a set has been edited since it was opened the
title of the set will be displayed with an * . To
save the set with the same name click the
Save
button.
6. To remove a set of clearing lines from the editor
click the Clear / New button. If any changes
have been made to the set a window prompts
to save the changes before clearing the lines
from the screen.
When a set of clearing lines is open in the editor the lines are
automatically enabled for display (at all nodes in a multi-node
system), before they are saved. However the clearing lines are not
monitored for safety checking until they are saved. When clearing a
saved set from the editor the set remains displayed until the set is
de-selected on the Monitor tab. This may be required on each node
depending on system configuration.
7. To delete a set of clearing lines An Action Required popup
window appears listing the previously saved clearing lines sets.
8. Select the set from the list to delete and click the OK button. A
window appears prompting to confirm the deletion. Click the OK
button to confirm, the clearing line set is deleted from the system.