Spengler CL Series, Service Manual

Page: 10 / 45

10
CL & PSL50 Series
Step 1: Clean canisters, canister outlets
SERVICE TASKS
Remove canisters. Remove chutes.
Close canister outlet gates by rotating
so arrows point straight up (A).
Wipe exterior of canisters with dry
cloth to remove any dust or spilled
ingredients. For dried-on ingredients,
damp cloth can be used to spot clean.
05
02 01 03 04
Clean all parts inside and out. Dry
after cleaning.
Pro Tip:
Save time by exchanging dirty
parts with clean spares and
washing and drying the dirty
parts later (in a dishwasher if
dishwasher-safe) then reusing
them during the next thorough
cleaning.
Snap chutes back on. Set aside.
06
Important:
For Biannual Service replace
the canister units. Dispose of all
used parts in the appropriate
recycling bins.
CL22:
Replace PN1003379
(1pcs) + PN10033780 (1pcs) +
PN1009619 (2pcs)
ES12B: Replace PN10009570
(1pcs) + PN10009705 (1pcs) +
PN1009619 (2pcs)
ES13:
Replace PN10009562
(1pcs) + PN10009563 (1pcs)
+ PN10009705 (1pcs) +
PN1009619 (3pcs)
FBT14:
Replace PN10009562
(1pcs) + PN10009563 (1pcs)
+ PN10009567 (1pcs)
+ PN10009704 (1pcs) +
PN1009619 (4pcs)