19 |
S p e d o 2 6 0 0 O p e r a t o r M a n u a l
S p e d o U K L t d
19
Spedo 2600 Pinless Cutter Operator Manual
OPTIONAL ACCESSORIES
APPENDIX A1
Double Cross-Cut Blade
This is a cross-cutting device for removing the cross perforation from the paper web, without any
loss of time or performance. The strip depth can be changed from 1/6
th
to 7.8mm.depending on
the size of blade to be fitted. The strip is cleanly separated from the forms on each motion of the
blades by blown air. The movable lower blade can be tilted off for single cut operation, if
required. In this mode, the Strip Depth switch on the control panel will be removed.
Optical Loop Switch Unit 2230
This unit is designed to control the height of the paper loop which forms between an out-feeding
printer or collator and the associated in-feeding Spedo Forms Cutter.
Optical Loop Interface Unit 2232
This unit is designed to control the height of the paper loop that forms between an out-feeding
printer or collator and the associated in-feeding Spedo Forms Cutter. It also detects the overflow
of paper out-feeding from the printer or collator that occurs if the Forms Cutter stops accepting
paper infeed.
Web Control Unit 9400
This unit is a high speed web buffer used to accurately control the paper web into the forms
cutter. The web buffer allows the operator to stop and start the entire print line automatically,
thus improving productivity.
Side Strip Chopper
This is used for shredding the cut-off side strip which is collected in a metal tray.
Anti-Static Kit
This is supplied with mounting accessories to remove static built up from the laser printing
process.
Centre Cutters
Additional Centre Cutter Assemblies can be fitted, providing additional longitudinal cuts along the
paper web.
Additional Accessories
Stack Tray & Paper Stops
