42 |
S p e d o 2 6 0 0 O p e r a t o r M a n u a l
S p e d o U K L t d
42
Spedo 2600 Pinless Cutter Operator Manual
COUNTER & BATCH MODE SET-UP:
-
Enter the counter screen by pressing the CHANGE button in the bottom left hand corner of the
screen.
-
The Counter screen will now be displayed.
-
Change the TARGET COUNT by pressing the CHANGE button and entering the required total into
the numeric keypad.
-
Reset the CURRENT COUNT by pressing the RESET button.
Batch Mode Set-up.
Different batch modes can be set depending on the type of output device attached to the cutter.
BATCH MODE 1: Normal
This is the default batch mode; in this mode the cutter will pause for the time period selected in MODE 1
TIME (this is selected by using the CHANGE button to scroll through the different values).
Once the TARGET COUNT has been reached, the counter will be reset and the cutter will resume once the
time period is over.
If the timer is set to 0 the cutter will stop once the target is reached, and will have to be restarted
manually.
BATCH MODE 2: Conveyor Boost
This batch mode is used for boosting the 8400 Conveyor; in this mode the conveyor will be set to full
speed for the time period selected in MODE 2 TIME (this is selected by using the CHANGE button to scroll
through the different values).
Once the TARGET COUNT has been reached, the counter will be reset and the conveyor will resume once
the time period is over.
In this mode the cutter will not pause when the target is reached.
