Chapter 3: Configuring the 2085-IF4XOF4-SC Using CCW
3-33
User’s Manual Pub. 0300307-01 Rev. A
Fault Code Extended Fault Code Error Description
0×520-453
Invalid Open Circuit Detection
The selected option is not applicable for current
measurement. See Configuration Assembly for
possible values.
The extended configuration fault code is not available and will be displayed as
0×0000 in Micro850 Series A & B PLCs and Micro870 Series A PLC.
Technical Support
Note that your module contains electronic components which are susceptible to
damage from electrostatic discharge (ESD). An electrostatic charge can
accumulate on the surface of ordinary plastic wrapping or cushioning material
. In
the unlikely event that the module should need to be returned to Spectrum
Controls, please ensure that the unit is enclosed in approved ESD packaging
(such as static-shielding / metalized bag or black conductive container).
Spectrum Controls reserves the right to void the warranty on any unit that is
improperly packaged for shipment.
RMA (Return Merchandise Authorization) form required for all product returns.
For further information or assistance, please contact your local distributor, or call
the Spectrum Controls Technical Support at:
USA - 425-746-9481
Declaration of
Conformity
Available upon request
Summary of Contents for 2085-IF4XOF4-SC
Page 1: ......
Page 8: ...viii Micro800TM Analog Combination I O Module User s Manual Pub 0300307 01 Rev A...
Page 20: ...1 12 Chapter 1 Module Overview User s Manual Pub 0300307 01 Rev A...
Page 62: ...3 34 Chapter 3 Configuring the 2085 IF4XOF4 SC Using CCW User s Manual Pub 0300307 01 Rev A...
