3-12
Chapter 3: Configuring the 2085-IF4XOF4-SC Using CCW
User’s Manual Pub. 0300307-01 Rev. A
8.
You can manually copy the settings and paste it to the textbox of the
CCW Configuration tab
9.
To automatically copy the generated settings into the textbox of the
CCW Configuration tab, have the textbox visible on the monitor screen,
and then click
Copy to CCW
button
The utility copies the configuration settings and shows it inside the
textbox.
10.
Download the CCW project to controller and start to run the module
operation.
Software Information
3.5.1
Software Versioning
The software version tracks major and minor revisions for end users.
The shipped software version begins at version 1.1.
Once released, the major revision is typically incremented if new features are
introduced to the product. Otherwise only the minor revision is incremented.
3.5.2
Software Updates
In-field updating of the software by the end user is not supported.
9
It is recommended that before manually or automatically pasting your configuration settings to the textbox
of the CCW Configuration tab, be sure to select the
Hex Radix
indication on both software packages. The
CCW software is unable to receive negative values under
Decimal Radix
indication.
Summary of Contents for 2085-IF4XOF4-SC
Page 1: ......
Page 8: ...viii Micro800TM Analog Combination I O Module User s Manual Pub 0300307 01 Rev A...
Page 20: ...1 12 Chapter 1 Module Overview User s Manual Pub 0300307 01 Rev A...
Page 62: ...3 34 Chapter 3 Configuring the 2085 IF4XOF4 SC Using CCW User s Manual Pub 0300307 01 Rev A...
