Spectrex SafEye Xenon 700S, User Manual

Page: 13 / 80

TM 799200 Rev. (4), April 2017 13
About this Guide
This manual describes the SafEyeTM Xenon 700S Gas Detection System and
its features and provides instructions on how to install, operate, and
maintain the detector.
This guide includes the following chapters and appendices:
 Chapter 1, Scope, provides a general introduction and overview of the
product and the guide, with a brief description of its content.
 Chapter 2, Technical Description, describes the detector’s theory of
operation.
 Chapter 3, Operation Mode, describes the detector’s operation modes,
user interface, and indications.
 Chapter 4, Technical Specifications, describes the detector’s
electrical, mechanical, and environmental specifications.
 Chapter 5, Installation Instructions, describes how to install the
detector, including wiring and mode settings.
 Chapter 6, Operating Instructions, describes the operating
instructions and power up procedures.
 Chapter 7, Maintenance Instructions, describes the maintenance and
support procedures .
 Chapter 8, Troubleshooting , describes the solutions to problems that
may arise with the detector.
 Appendix A, Wiring Selection Tables, describes the electrical wire
selection according to the installation configuration.
 Appendix B, Wiring Option Configurations, provides wiring diagrams
for installation .
 Appendix C, Special Conditions for Compliance with SIL-2
Requirements,
describes the special conditions for compliance with the
SIL-2 requirements.