manualshive.com logo in svg

SpectraLink IP-DECT SERVER 6500, Installation And Configuration Manual, Page: 81 / 126

Share
Download
SpectraLink IP-DECT SERVER 6500 Installation And Configuration Manual Download Page 81

Spectralink IP-DECT Server 6500 Installation and Configuration Guide

14215700 Version 3.0
April, 2014

79

Chapter 12: System Management

This section provides you with information about the web based Administration Page of the 
Spectralink IP-DECT Server 6500. 

Through the web based Administration Page of the Spectralink IP-DECT Server 6500 it is possible 
to define and view different settings of the system, reading statistics, making a backup of 
configuration file, updating system software, and resetting the system.

Spectralink IP-DECT Server 6500

Changing System User Name and Password

From the Administration Page it is possible to change the user name and password for the system.

1

Click 

Configuration

, and then click 

Security

.

Figure 62

Adm. Page WS: Configuration/Security page

2

In the 

Current password

 field, type the current password.

3

In the 

New user name 

field, type a user name.

4

In the 

New password

 field, type a new password

5

In the 

New password again

 field, type the new password again to confirm it.

6

Click 

Save

 to change the password.

Note

It is not possible to import handset registration data already registered in the system. 

Summary of Contents for IP-DECT SERVER 6500































































































































Reviews:

No comments