Spectralink IP-DECT Server 6500 Installation and Configuration Guide
14215700 Version 3.0
April, 2014
62
Field
Explanation
Require
d
Optiona
l
MTU
(Maximum
Translation
Unit)
Enter the size of the largest packet, that
your network protocol can transmit
x
VLAN
Enter the VLAN Identifier (VID) according to
IEEE 802.1Q specifying the VLAN to which
the device belongs. The IP-DECT Server
400 supports 4094 different VLANs.
Values: 1-4094
x
General Configuration - DNS (Domain Name System)
Hostname
The hostname will be inserted into the SIP
Contact and via headers. The hostname will
also be published via DHCP and if the
network infrastructure supports it, the
device will be reachable via this hostname.
x
Domain
Enter the name of the domain where
system belongs.
x
Primary
Server
Enter the IP address of the Primary DNS
server
x
Secondary
Server
Enter the IP address of the Secondary DNS
server
x
General Configuration - NTP (Network Time Protocol)
Server
Enter the address of the NTP server from
which the system will obtain the current
time.
x
Time Zone
Select the time zone.
x
UPnP
Enabled
UPnP is an acronym for Universal Plug and
Play. If the IP-address of the device is
unknown (e.g. forgotten or
DHCP-assigned), UPnP can be used to
easily identify the IP-address of the device.
If “My Network Places” in Windows is setup
to show icons for networked UPnP devices,
every KWS 6500, Media resource and Base
station will be present in “My Network
Places”.
Enabled
by
default
