Spectralink IP-DECT Server 6500 Installation and Configuration Guide
14215700 Version 3.0
April, 2014
18
Resetting the Spectralink IP-DECT Server 6500/Spectralink Media Resource Hardware
The following table contains a description of the different actions that take place when you press
the Reset button.
Installation
The Spectralink IP-DECT Server 6500/media resource is mountable in a rack.
Figure 4
Spectralink IP-DECT Server 6500/Media Rack Mounting
1
Mount the two wings with the screws. If you are mounting the Spectralink IP-DECT Server
6500 on a wall, twist the wings 90° degrees.
2
Mount the cabinet in the 19" rack or on the wall, Screws and nuts/rawl plugs are not supplied.
3
Connect the RJ45 ethernet plug to the front of the cabinet. All servers and media resources
must be connected to a switch port. Installed Media Resources must have their own switch
port.
4
Connect the power on the back of the cabinet.
Table 7
Reset Button Description
Press button
Action
Short press (2 to 5 sec.)
System restarts when button is released.
Long press (5 to 9 sec.)
until front LED flashes
red, then release button
Resets the system to factory default settings (original
IP settings and empty user data base) and restarts the
system.
Firmware version is not affected.
