![background image](http://html1.mh-extra.com/html/speck-pumps/badu-vac-1/badu-vac-1_installation-and-operation-manual_1341837011.webp)
10
SOLUTIONS
6.
Continued
•
Check that the cleaner has proper hose
balance in shallow end.
•
Check to ensure your cleaner is
operating at the proper speed of
2-4 meters per minute.
•
Check to ensure the dive float mechanism
is operating freely and the dive float
restrictor is installed. (See page 2 for how
to install dive float restrictor.)
•
Shorten the dive float restrictor by 1cm.
(Pull out upper end of the restrictor from
the locking end clip attached to the
swivel head. Cut 1cm off, then return the
restrictor into the locking end clip.)
PROBLEMS
7.
When the cleaner tracks in a
repetitive pattern.
•
Check the swivel on the top of the
cleaner. It should turn freely.
•
Check the return line water flow and
re-direct as necessary with an eyeball
diverter.
•
Check the cleaner’s hoses to ensure it has
not become bent or kinked. It only takes
one bent or kinked hose section to hinder
the cleaning coverage. One way to check
for kinks in your hose is to lay each
section flat on your pool’s deck (or other
flat surface). The hose should be
perfectly straight and flat. Do not coil the
hose when taking your cleaner out of
the pool because it will retain the coil
shape, forming a bend or kink.