![background image](http://html1.mh-extra.com/html/speck-pumps/badu-vac-1/badu-vac-1_installation-and-operation-manual_1341837002.webp)
I
. Preparation of Your Pool
Before assembling and installing your cleaner, your pool should be clean and algae-free so as not to
inhibit the cleaner’s traction. If necessary, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
II
.
Assembly
Remove the body and all of its parts from the box and check to make sure that all components were
included. Refer to Figure 1.
Components Check List
1. Body
2. Dive float restrictor
3. Eyeball diverter and
outer ring (Optional extra)
4. Hose weights (Set of 3)
(Optional extra)
5. Automatic regulator valve
(Optional extra)
6. Regulator Valve 2” (50mm)
Hose Cone (Optional extra)
7. Roller bumper strap
8. Pleated skirt
9. Hose-10 meters total length
(not shown)
1
Figure 1