![background image](http://html1.mh-extra.com/html/speck-pumps/badu-vac-1/badu-vac-1_installation-and-operation-manual_1341837013.webp)
To Remove Debris from the Hammer.
•
Sometimes debris may clog the bottom of the
cleaner and prevent hammer movement or restrict
flow. The hammer is located inside the main body
and must move freely at all times.
You can see the hammer through the opening in
the hammer cover, when you turn the cleaner
upside down as shown in Figure 11.
Jiggle the hammer with your finger or flush the
cavity with a hose to fore out any debris lodged
inside the main body.
•
If debris is still lodged inside, you must remove the hammer. First, remove the pleated skirt.
Unscrew the hammer cover and then remove it from the main body.
In succession, take out the screw from the hammer cover. Lastly, remove the hammer from
the main body. See Figure 12.
•
Once the debris is dislodged, insert the hammer back into the main body and snap the
hammer cover back into position. Be sure that it is securely in place and tighten the screw.
Do not over tighten the screw, you might damage the hammer cover. See Figure12.
Figure 11
Figure 12
12