Step 1.
Attach the Skirt
To install the skirt locate the words
“Up”
and
face them towards the main body, slip the
skirt over the foot pad-(flat side down towards
pool floor)-and full gently until it seats itself
on the other side in its groove as illustrated
in Figure2.
Skirt must be installed flat side down,
pleated side up
.
Once in place, the skirt should rotate
and turn freely.
The skirt is not reversible. The raised pleats on the
pleated skirt must face upward. The flat side of the
skirt should face down to rest against the pool surface.
Step 2.
Attach the Roller Bumper Strap
Snap the roller bumper strap into the lower U-shaped
brace between the dive floats. Make sure the locking
tabs on both sides of the roller bumper strap snap
securely into place. See Figure 3.
Step 3.
Attach The Dive Float Restrictor
Insert the bottom end of the strap into the slot
provided on the main body. Insert the top end of the
strap into the locking clip attached to the swivel head.
See Figure 4.
2
Figure 3
Figure 4
Figure 2