![background image](http://html.mh-extra.com/html/poolvergnuegen/poolcleaner/poolcleaner_quick-start-manual_1579633001.webp)
TM
Remove the POOL-
CLEANER ™ from the
1
2
tires are worn down to the
tread wear indicators!
TO REMOVE THE 2X
POOLCLEANER ™ TIRES
OR 4X POOLCLEANER
™ FRONT TIRES,
using
only your hands (other
objects may damage the
POOLCLEANER ™) simply
fold the tire off from top to
bottom.
3
BEFORE YOU DO ANYTHING, TURN THE PUMP
OFF
. SUCTION CAN BE
DANGEROUS!!!
pool, making sure to place
the hoses straight. Separate
the POOLCLEANER ™ from
the Leader Hose.
Place the cleaner on a
work surface.
The tires must be
replaced when the
4
TO REMOVE THE 4X
POOLCLEANER ™
BACK TIRES
you will need
to remove the Shroud with a
Phillips screwdriver (see pg.
11 step 3) and then remove
the Wheel Hubs with a 5/32”
or 4 mm Allen wrench turning
the wrench counterclockwise.
5
Place the bolt through the Wheel Hub and line it up
with the threaded hole, making sure the gear pro-
truding from the POOLCLEANER ™ engages with
the gears on the Wheel Hub. Tighten bolt with Allen
wrench clockwise.
6
Place the Shroud back onto the POOL-
CLEANER ™ making sure it’s on correctly.
Drop the three screws into the screw holes and
secure.
Note:
The front tires
ALWAYS have
HUMPS (raised treads) [ 2X
& 4X POOLCLEANER ™].
The back tires on the 4X
DO NOT have humps!
Wheel Hub (starting from one
side and folding it back on).
Make sure the tire is on cor-
rectly.
Once off,
fold the tire
off the Wheel
Hub (step
3 above).
To replace
stretch the
tire over the
If need be do this closer to your
body for better leverage.
CHANGING TIRES ON YOUR
SUCTION
POOLCLEANERS