RHD Series RHD
230/250/280
17
Hydraulically operated offset of up to 500mm
Setting Up & Adjustment
The height of cut is dependent on working
conditions and volume of material. The cutting
height can be regulated with the hydraulic
system on the tractor and/or rear roller
adjustment. The minimum height of cut should
be between 1
– 3cm.
NOTE:
The
machine
must
always run on the rear roller not
the side skids
– side skids are a
protection feature and in normal
working conditions remain clear
of the ground.
Do not allow the rotor flails to
contact the ground - set roller
height to allow a minimum flail to ground clearance of 1 to 3cm.
Offsetting
The machine features a hydraulically operated
offsetting capability of up to 500mm allowing
the machine to cut larger areas of material
beyond the wheel tracks of the tractor
– this is
particularly useful for verge mowing duties and
work in areas of limited or restricted
accessibility.
The machine offsets to the right hand side of
the tractor.
